Bosch NWD-455V03-20P Operating Instructions - Page 93
Function test
View all Bosch NWD-455V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
FlexiDome IP Configuration via the browser | en 93 Configuration upload 1. Enter the full path of the file to upload or click Browse... to select the desired file. 2. Make certain that the file to be loaded comes from the same device type as the unit you want to reconfigure. 3. Click Upload to begin transmission to the unit. The progress bar allows you to monitor the transfer. Once the upload is complete, the new configuration is activated. The time remaining is shown by the message going to reset Reconnecting in ... seconds. After the upload is completed successfully, the unit restarts automatically. SSL certificate upload To work with an SSL connection, both sides of the connection must have the appropriate certificates. You can upload one or more certificate files, one at a time, to the camera. 1. Enter the full path of the file you wish to upload or click Browse... to locate the file. 2. Click Upload to start the file transfer. The unit restarts automatically after a successful upload. 7.15 Function test The camera offers a variety of configuration options. Therefore you should check that it works properly after installation and configuration. This is the only way to ensure that the camera will function as intended in the event of an alarm. Your check should include the following functions: - Can the camera be called remotely? - Does the camera transmit all the data required? - Does the camera respond as desired to alarm events? - Is it possible to control peripheral devices if necessary? Bosch Security Systems Operating Instructions V 1.0 | 2006.12