Bosch WTVC8330US User Manual - Page 23

LED Indicators of Cycle Sequence The dryer uses an electronic scanning system for all cycles except the time cycles . A moisture sensor continuously checks the moisture in the laundry. Drying ends automatically as soon as the selected degree of dryness has been reached. LED Indicators Vary by Model 300 Series Dryer LED's The current degree of drying is represented by using LED indicator lights. Each light is illuminated in succession as drying progresses. The LED to the left of Drying" illuminates when the selected drying cycle begins. On select models, LED lights for Damp Dry" and Regular Dry" indicate as each stage is reached. When the load is finished the LED beside Wrinkle Block/Finished" is illuminated. 500 Series Dryer LED's Wrinkle Block/Finished" The drum continues to rotate at specific intervals to help decrease wrinkling of the laundry load. Remove the laundry when the cycle is finished, or within the Wrinkle BlockR period for best results. Wrinkle BlockR begins when the drying phase ends for every cycle except the wool cycle. Following the end of a drying cycle, Wrinkle BlockR turns the drum for about 16 seconds every two minutes for the first 10 minutes, then about 16 seconds every 5 minutes for the next 50 minutes. 800 Series Dryer LED's i If any LED or button is illuminated on the panel when the cycle selector is turned to the Off" position, please turn off the circuit breaker and call customer service. 23