Bosch WTVC8330US User Manual - Page 8
Warning, Notice - weight
UPC - 825225874430
View all Bosch WTVC8330US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation location d WARNING DO NOT install the dryer: - outdoors - in an environment with dripping water, - near flammable materials, - in rooms which are at risk of frost, - in rooms which may contain gas or other fuels, - in cupboards with lockable doors. The installation room must be well ventilated, otherwise the dryer will operate below optimum performance. Do not operate the dryer at temperatures above 104°F (40°C) or below 41°F (5°C). Low temperatures affect the automatic program sequence and may prolong the drying times. The installation surface for the dryer must be clean, level and firm. Do not install the appliance on carpets! Compensate for uneven floors with the heightĆadjustable feet. The size of the installation area depends on the dimensions of the dryer. Ensure that there is adequate room for the swivel range of the door! Dryer Dimensions a b c (min)* c (max)* d e Dimension 27.0" (68.6 cm) 31.8" (81.0 cm) 36.9" (93.6 cm) 37.8" (95.9 cm) 22.0" (59.7 cm) angle 160° 53.9" (136.9 cm) Weight 125 lbs (56.7 kg) with packaging 143 lbs (64.8 kg) * min=dryer feet all the way in, max=out 8 Useful Tools The following tools are helpful during installation: 1. T20 star head screwdriver 2. Philips screwdriver (#2) 3. Flat blade screwdriver 4. Open end wrench 1 in. (25mm) 5. Bubble level Checklist for Installation 1. Unpack the dryer. 2. Remove all objects from the drum. 3. Check the dryer for visible damage. 4. Position the dryer near the installation location (see page 8). 5. If required, change the door hinge to the left (see page 9). 6. If required, install the side or bottom exhaust air outlet on the dryer (see page 19). 7. Have the power supply cord fitted by a qualified technician or a licensed electrician (see page 14). 8. Check for Y" connection, short hose and water supply hose included with the dryer packaging (see page 13). (Selected models only). 9. Connect the water supply (selected models only) to the back of the dryer (see page 13 for detailed instructions). 10. Install exhaust ductwork if necessary. Follow the installation instructions supplied by the appropriate ductwork parts manufacturers (see page 18) i If space is very restricted, it is recommended to fit the initial parts of the exhaust duct to the dryer before the dryer is moved to its final installation location. NOTICE DO NOT push against the dryer door glass. Risk of breakage! 11. Move the dryer to its final location. NOTICE Do not slide dryer across the floor if heightĆadjustable feet have been extended. Feet and/or dryer base may be damaged if dryer is slid across floor with heightĆadjustable feet extended. 12. Position and then level the dryer. The dryer should be level with all four feet firmly on the ground. The dryer must not wobble. If the dryer is not level or if it does wobble, the feet must be adjusted. Adjust the heightĆadjustable feet using the 1 in. (25mm) wrench until the dryer does not rock and is level, both frontĆtoĆback and sideĆtoĆside.