Brother International 2340CV Users Manual - English and Spanish - Page 11
III. Threading
View all Brother International 2340CV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH III. Threading Needle threading 333 333 6 F 5 4 G 444 • Pass each thread from 333 to 444 as shown in this illustration. • Pass the thread through the proper thread guide. • Slide and hold the thread tension release button to the right, then pass the thread through the tension disc which is in the channel next to the tension adjustment dial. Release the but- ton. F Tension disk G Thread tension release button 1 1 2 2 1 2 CAUTION Always be sure to turn off the power before carrying out the following operation. (1) Follow the procedure described below to thread the needle. Threading the left needle • Run the thread in the sequence illustrated, following the yellow color and the numbers next to each threading point. (1-9) Threading the center needle • Run the thread in the sequence illustrated, following the pink color and the numbers next to each threading point. (1-9) Threading the right needle • Run the thread in the sequence illustrated, following the green color and the numbers next to each threading point. (1-9) CAUTION When needle threading, always thread in this order: Left needle, center needle and then right needle. A To left needle B To center needle C To right needle D Branching plate E Pull about 6 cm (about 2-1/2 inches) of thread through the eye of the needle. 999 Front to back A D 3 33 666 4 4 4 BC 777 5 55 888 E 999 9