Brother International 2340CV Users Manual - English and Spanish - Page 21

ENGLISH VI. Maintenance Change the light bulb 2 1 4 3 5 CAUTION Always be sure to turn off the power before carrying out the following operation. The glass plate over the light bulb will be hot immediately after using the machine, therefore it is advisable to wait until the light bulb has had a chance to cool down before changing bulbs. Changing the light bulb. • Remove the lamp cover as shown in the illustration. • Loosen the lightbulb cover set screw pull up the light bulb cover and remove it. • Take out the light bulb and replace it with a new one. 1 Screw 2 Lamp cover 3 Screw 4 Light bulb cover 5 Light bulb 4 VII. Machine specifications Stitch One needle two thread double chain stitch Two needles three thread cover stitch (Wide 6 mm (15/64 inch)/Narrow 3 mm(1/8 inch)) Three needles four thread cover stitch (6 mm (15/64 inch)) Presser foot Free presser type Presser foot lift 5 mm to 6 mm (3/16 to 15/64 inch) Sewing speed 1,000 stitches per minute Needle SCHMETZ 130/705H (90/#14) Stitch length (pitch) 2 mm to 4 mm (5/64 to 5/32 inch) Machine net weight 7.0 kgs. 19