Brother International 2340CV Users Manual - English and Spanish - Page 16

Chain stitch sewing One needle two threads double chain stitch

Get Brother International 2340CV PDF manuals and user guides View all Brother International 2340CV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Chain stitch sewing (One needle two threads double chain stitch) A 1 Use two threads. The center needle thread and looper thread. Use: For straight stitching, basting and decorative chain stitch. Needle and threading • For details on installing and removing the needle, refer to "Needle" on page 7. 1 Center needle IMPORTANT!! Lightly tighten the screw at the unused needle position, so it does not fall out while sewing. • For details on threading the machine, refer to "III. Threading" on page 9 to 10. < Threading the center needle > < Threading the looper > Tension adjustments (1) First, set each thread tension dial to the number shown below. A Tension selection mark Left needle dial (yellow) - Right needle dial (green) - Center needle dial (pink) 2 Looper needle dial (blue) 5 CAUTION Make sure that the thread is properly seated in the tension discs by holding the tension release button to the right while passing the thread through the tension discs. (2) Sew a test stitch. (Refer to "V. Sewing" on page 15.) (3) Adjust the tension of each thread according to the condition of the stitch. Stitching direction Balanced tension The needle thread sews a straight seam on the top side and the looper thread forms loops on the under side of the fabric. Needle thread is too loose Turn the needle thread adjusting dial to a higher number. Or turn the looper adjusting dial to a lower number for looser tension. 14 Needle thread is too tight Turn the needle thread adjusting dial to a lower number. Or turn the looper adjusting dial to a higher number for tighter tension.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
14
Chain stitch sewing (One needle two threads double chain stitch)
Use two threads. The center needle thread and looper
thread.
Use:
For straight stitching, basting and decorative chain stitch.
Needle and threading
•
For details on installing and removing the needle,
refer to
“
Needle
”
on page 7.
1
Center needle
IMPORTANT!!
Lightly tighten the screw at the unused needle
position, so it does not fall out while sewing.
•
For details on threading the machine, refer to
“
III.
Threading
”
on page 9 to 10.
< Threading the center needle >
< Threading the looper >
Tension adjustments
(1)First, set each thread tension dial to the number
shown below.
A
Tension selection mark
Balanced tension
The needle thread sews a straight seam on the top
side and the looper thread forms loops on the under
side of the fabric.
CAUTION
Make sure that the thread is properly seated in
the tension discs by holding the tension release
button to the right while passing the thread
through the tension discs.
(2)Sew a test stitch. (Refer to
“
V. Sewing
”
on page 15.)
(3)Adjust the tension of each thread according to the
condition of the stitch.
Stitching direction
Left needle dial
(yellow)
–
Center needle dial
(pink)
2
Looper needle dial
(blue)
5
Right needle dial
(green)
–
1
A
Needle thread is too loose
Turn the needle thread adjusting dial to a higher
number. Or turn the looper adjusting dial to a lower
number for looser tension.
Needle thread is too tight
Turn the needle thread adjusting dial to a lower
number. Or turn the looper adjusting dial to a higher
number for tighter tension.