Brother International BES-961BC Instruction Manual - English - Page 146
Replacing (Attaching) Rotary Hook
View all Brother International BES-961BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Chapter 8 Standard Adjustment 2. Replacing (Attaching) Rotary Hook Lower shaft 1. Turn the power switch off. 2. Tighten the screw q of the rotary hook cutting section to fit to that of the lower shaft w. 3. When mounting, press it inward until it stops. Note) After replacing rotary hooks, refer to "4. Adjustment of Timing Between Needle and Rotary Hook (Page 146)" and adjust the timing. q Cutting section 144 BES-961BC • BES-1261BC
Chapter 8
Standard Adjustment
BES-961BC
•
BES-1261BC
144
q
Lower
shaft
2. Replacing (Attaching) Rotary Hook
1.
Turn the power switch off.
2.
Tighten the screw
q
of the rotary hook cutting
section to fit to that of the lower shaft
w
.
3.
When mounting, press it inward until it stops.
Note)
After replacing rotary hooks, refer to "4. Adjust-
ment of Timing Between Needle and Rotary Hook
(Page 146)" and adjust the timing.
Cutting
section