Brother International BES-961BC Instruction Manual - English - Page 38
right side of the inner thread guide, and pass it through the hole of the thread take-up.
View all Brother International BES-961BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 1 Preparation of Embroidery Machine 3. Pass the thread through the upper hole of the 2nd pretension. Push up the tension disc with your finger, and place the thread under the disc. Then, pass it through the lower hole, and wind it around the thread breakage pulley twice. 4. Pass the thread through the hole of the upper thread guide (U), wind it into the tension disk clockwise once, and place it on the spring. 5. Pass the thread through each hole of the upper thread guide (U) and the thread guide (C). 6. After passing the thread through the hole of the thread guide (U), insert the thread into the right side of the inner thread guide, and pass it through the hole of the thread take-up. 7. Bring the thread to the inner thread guide again to insert it into the hole from the upper section, then into the lower thread guide. 8. Pass the thread through the hole of the needle bar thread guide, then pass it through the needle eye, without passing it through the presser foot. 36 BES-961BC • BES-1261BC