Brother International BES-961BC Instruction Manual - English - Page 27
BES-1261BC, Press the change bracket collar
View all Brother International BES-961BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
s BES-1261BC Chapter 1 Preparation of Embroidery Machine Bridge r Connecting shaft Fixing bracket q t Fixing bracket B o q o u y i e w 1. Remove 3 pieces of fixing screw q,loosen 2 pieces of screw w and remove the color change cover e. 2. Remove the bolts r and detach the fixing bracket for transportation from the bridge and the connecting shaft. 3. Loosen the bolts t and move the needle bar case y left side. 4. Press the change bracket collar i against the change case base u, while pressing the left side change bracket collar o against the change case base u, and tighten the bolts t.Check that needle bar No.1 and 12 are inserted into the needle plate holes smoothly. (Notes) • Check that ther is no play for the connecting shaft in the horizontal direction. • If the bolt of the right side change bracket collar i is loosened, the change bracket collar i may be dislocated and adjusting position of the needle bar case y will be required. So don't loosen this bolt. 5. Attach the color change cover e by 3 pieces of fixing screw q and 2 pieces of fixing screw w. BES-961BC • BES-1261BC 25