Brother International BES-961BC Instruction Manual - English - Page 151

Emergency Stopping disappears., Check that the clearance between

Get Brother International BES-961BC PDF manuals and user guides View all Brother International BES-961BC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 151 highlights

e w * Bad example ˰ q Toward this side Chapter 8 Standard Adjustment • The thread trimmer connecting rod B q has a backlash of about 0.1 ~ 0.2 mm back and forth. Tighten the two bolts e while pulling them forward by the backlash amount. • Tighten the two bolts e so that the thread trimmer connecting rods B q and C w are positioned in a straight line. t r 5. After adjustment is finished, reset the emergency stop button. "Emergency Stopping" disappears. 6. Turn the power switch off once, then on again. Check that the clearance between the movable knife r and the fixed knife t is 1 mm. 7. When adjusting again, follow the step 2 and after. 1mm BES-961BC • BES-1261BC 149

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
Chapter 8
Standard Adjustment
BES-961BC
•
BES-1261BC
149
• The thread trimmer connecting rod B
q
has a backlash of about 0.1 ~ 0.2 mm back
and forth.
Tighten the two bolts
e
while
pulling them forward by the backlash
amount.
•
Tighten the two bolts
e
so that the thread
trimmer connecting rods B
q
and C
w
are positioned in a straight line.
5.
After adjustment is finished, reset the
emergency stop button.
"Emergency Stopping" disappears.
6.
Turn the power switch off once, then on
again.
Check that the clearance between
the movable knife
r
and the fixed knife
t
is 1 mm.
7.
When adjusting again, follow the step 2 and
after.
q
w
e
* Bad example
1mm
t
r
Toward
this side
⇒