Brother International CS-6000/6000b/6000t Operation Manual - Page 10

Page 10 highlights

KNOWING YOUR SEWING MACHINE CAUTION ● When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. Depress the foot controller to start sewing, and adjust the sewing speed by changing the pressing force. Slower Changing the needle stop position Normally, the sewing machine is set to leave the needle in the fabric when sewing is stopped. Instead, the machine can be set to leave the needle raised when sewing is stopped. Turn off the sewing machine. a Hold down the "-" side of (a) on the left and b turn on the sewing machine. Faster You should make sure that nothing is placed on the foot controller when the machine is not in use. CAUTION ● Do not allow pieces of cloth and dust to build up on the foot controller. Doing so could cause a fire or an electric shock. Note ● When the foot controller is plugged in, the start/ stop button cannot be used to start or stop sewing (only for models equipped with the start/stop button). Sewing speed controller (for models equipped with the start/stop button) Slide the sewing speed controller to select the a desired sewing speed. After turning on the sewing machine, release the c "-" side of (a).  The needle stop position changes to the raised position. Memo • Perform the same operation to change the needle stop position to the lowered position. a Sewing speed controller • The speed set using the sewing speed controller is the foot controller's maximum sewing speed. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
8
KNOWING YOUR SEWING MACHINE
Depress the foot controller to start sewing, and adjust
the sewing speed by changing the pressing force.
You should make sure that nothing is placed on the
foot controller when the machine is not in use.
Note
●
When the foot controller is plugged in, the start/
stop button cannot be used to start or stop sewing
(only for models equipped with the start/stop
button).
a
Slide the sewing speed controller to select the
desired sewing speed.
a
Sewing speed controller
• The speed set using the sewing speed
controller is the foot controller’s maximum
sewing speed.
Normally, the sewing machine is set to leave the
needle in the fabric when sewing is stopped. Instead,
the machine can be set to leave the needle raised when
sewing is stopped.
a
Turn off the sewing machine.
b
Hold down the “–” side of
(
a
) on the left and
turn on the sewing machine.
c
After turning on the sewing machine, release the
“–” side of
(
a
).
The needle stop position changes to the raised
position.
Memo
• Perform the same operation to change the
needle stop position to the lowered position.
CAUTION
●
When connecting the foot controller, be sure to
turn off the sewing machine in order to prevent
the machine from accidentally being started.
CAUTION
●
Do not allow pieces of cloth and dust to build
up on the foot controller. Doing so could cause
a fire or an electric shock.
Sewing speed controller
(for models equipped with
the start/stop button)
Slower
Faster
Changing the needle stop position