Brother International CS-6000/6000b/6000t Operation Manual - Page 9

USING YOUR SEWING MACHINE Power supply precautions Be sure to observe the following precautions concerning the power supply. WARNING ● Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine. ● Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power supply jack on the machine. Otherwise, a fire or electric shock may result. ● Do not insert the plug on the power cord into an electrical outlet that is in poor condition. ● Turn off the main power and remove the plug in the following circumstances: • When you are away from the machine • After using the machine • When the power fails during use • When the machine does not operate correctly due to a bad connection or a disconnection • During electrical storms CAUTION ● Use only the power cord included with this machine. ● Do not use extension cords or multi-plug adapters with many other appliances plugged in to them. Fire or electric shock may result. ● Do not touch the plug with wet hands. Electric shock may result. ● When unplugging the machine, always turn off the main power first. Always grasp the plug to remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock. ● Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the cord and cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized dealer for repairs before continuing use. ● Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a fire may result. Power supply Insert the plug into a wall outlet. a 1 a Main power switch b Jack/socket connector Set the main power switch to "I". b  The sewing lamp comes on when the machine is turned on. To turn off the machine, set the main power c switch to "".  The sewing lamp goes off when the machine is turned off. Note ● If a power outage occurs while the sewing machine is being operated, turn off the sewing machine and unplug the power supply cord. When restarting the sewing machine, follow the necessary procedure to correctly operate the machine. (For U.S.A. only) ● This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. Foot controller Insert the foot controller plug into its jack/socket. a Foot controller jack/socket 7