Brother International CS-6000/6000b/6000t Operation Manual - Page 53
tangled, the needle may break or sewing
View all Brother International CS-6000/6000b/6000t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Remove the bobbin case. e Grasp the bobbin case, and then pull it out. 1 a Bobbin case Use the cleaning brush or a vacuum cleaner to f remove any dust from the race and its surrounding area. a Cleaning brush b Race • Do not put oil on the bobbin case. Insert the bobbin case so that the mark on the g bobbin case aligns with the mark on machine as shown below. • Align the and ● marks. a Bobbin case b mark c ●mark • Make sure that the indicated points are aligned before installing the bobbin case. CAUTION ● Never use a bobbin case that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case (part code: XE7560-001), contact your nearest 4 authorized service center. ● Make sure that you fit the bobbin case properly, otherwise the needle may break. Put the tabs on the needle plate cover into the h needle plate, and then slide the cover back on. 1 51