Brother International CS-6000/6000b/6000t Operation Manual - Page 17

While lowering the needle threader lever, hook c the thread onto the guide. Pass the end of the thread as illustrated bellow. f a Needle holder b Needle threader lever c Guide Fully lower the needle threader lever. d 1 a 5 cm (2 inch) Note ● If you incorrectly feed the thread you may cause sewing problems. Drawing up the lower thread Lightly hold the end of the upper thread. a  The hook passes through the eye of the needle, and catch the thread. a Hook b Thread Release the needle threader lever. Then pull the e loop of the thread. a Upper thread While holding the end of the upper thread, raise b the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) (for models equipped with the needle position button) once or twice. or a Mark b Needle position button Pull on the upper thread to draw up the lower c thread. a Upper thread b Lower thread 15