Brother International DCP-1400 Users Manual - English - Page 129
Clear Settings, Follow these steps to replace the drum unit
View all Brother International DCP-1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Follow these steps to replace the drum unit: 1 Open the front cover. 2 Remove the old drum unit. Place the drum unit on a drop cloth or disposable paper to avoid scattering toner. 3 Hold down the lock lever on the right and pull the toner cartridge out of the drum unit assembly. (See Replacing the Toner Cartridge, page 14-16.) Lock Lever Discard the used drum unit according to local regulations. If you are not sure of them, call your local Sanitation Department. Be sure to seal the drum unit tightly so toner powder does not spill out of the unit. When discarding used drum units, keep them separate from domestic garbage. 4 Wait to unpack the new drum unit until immediately before installing it. Place the old drum unit into the aluminium bag and discard it according to local regulations. 5 Reinstall the toner cartridge into the new drum unit. (See Replacing the Toner Cartridge, page 14-16.) 6 Reinstall the new drum unit, keeping the front cover open. 7 Press Clear Settings. 8 Press 1 and when the LCD shows ACCEPTED, and close the front cover. REPLACE DRUM? 1.YES 2.NO Caution If toner scatters and your hands or clothes get dirty, immediately wipe it off or wash it with cold water. T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 14 - 20