Brother International DCP-8155DN Advanced User's Guide - English - Page 36

drum unit until you hear it lock into place., Put the toner cartridge back into

Page 36 highlights

i Turn the drum unit gear toward you by hand while checking the surface of the suspected area. l Put the toner cartridge back into the drum unit until you hear it lock into place. If you put the cartridge in correctly, the green lock lever will lift automatically. j When you have found the mark on the drum that matches the drum dot check sheet, wipe the surface of the drum gently with a cotton swab until the mark on the surface comes off. Important DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. k Turn the drum unit back over. Note Make sure that you put in the toner cartridge correctly or it may separate from the drum unit. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

32
i
Turn the drum unit gear toward you by
hand while checking the surface of the
suspected area.
j
When you have found the mark on the
drum that matches the drum dot check
sheet, wipe the surface of the drum
gently with a cotton swab until the mark
on the surface comes off.
Important
DO NOT clean the surface of the
photosensitive drum with a sharp object or
any liquids.
k
Turn the drum unit back over.
l
Put the toner cartridge back into the
drum unit until you hear it lock into place.
If you put the cartridge in correctly, the
green lock lever will lift automatically.
Note
Make sure that you put in the toner
cartridge correctly or it may separate from
the drum unit.