Brother International FAX-8650P Service Manual - Page 29
Control Electronics
View all Brother International FAX-8650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. CONTROL ELECTRONICS 3.1 Configuration The hardware configuration of the facsimile equipment is shown below. (NOTE 1) Provided on the FAX-8650P. *1 On the document sensor PCB are these sensors: - Document rear sensor (PH1) - Document front sensor (PH2) *2 On the main PCB are these sensors: - Top cover sensor (PC1) - Sheet feeder cover sensor (PC2) - Registration sensor (PC3) *3 On the toner sensor PCB are these sensors: - Toner sensor - Toner thermister *4 On the high-voltage power supply PCB is the paper ejection sensor. *5 On the hook switch PCB is the hook switch. (Not provided on the FAX-8650P.) Configuration of Facsimile Equipment III - 12
III
- 12
3.
CONTROL ELECTRONICS
3.1
Configuration
The hardware configuration of the facsimile equipment is shown below.
Configuration of Facsimile Equipment
(NOTE 1)
Provided on the FAX-8650P.
*1
On the document sensor PCB are these sensors:
- Document rear sensor (PH1)
- Document front sensor (PH2)
*2
On the main PCB are these sensors:
- Top cover sensor (PC1)
- Sheet feeder cover sensor (PC2)
- Registration sensor (PC3)
*3
On the toner sensor PCB are these sensors:
- Toner sensor
- Toner thermister
*4
On the high-voltage power supply PCB is the paper
ejection sensor.
*5
On the hook switch PCB is the hook switch.
(Not provided on the FAX-8650P.)