Brother International FAX-8650P Service Manual - Page 63
Disconnect the hook switch harness from the hook switch PCB
View all Brother International FAX-8650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
(5) Disassemble the handset mount by unhooking two latches "a" of the upper handset mount with a flat screwdriver. (6) Remove the hook switch PCB ASSY by unhooking latch "b." (7) Disconnect the hook switch harness from the hook switch PCB n Reassembling Notes • When assembling the upper and lower handset mounts, route the hook switch harness underneath the hook switch PCB and through the cutout as shown above. Take care not to pinch the harness between the upper and lower mounts. IV - 25
IV
- 25
(5)
Disassemble the handset mount by unhooking two latches "a" of the upper handset
mount with a flat screwdriver.
(6)
Remove the hook switch PCB ASSY by unhooking latch "b."
(7)
Disconnect the hook switch harness from the hook switch PCB
n
Reassembling Notes
•
When assembling the upper and lower handset mounts, route the hook switch harness
underneath the hook switch PCB and through the cutout as shown above.
Take care not to
pinch the harness between the upper and lower mounts.