Brother International FAX-8650P Service Manual - Page 78
Remove the screw from the NCU bracket., Make sure that the MJ cover
View all Brother International FAX-8650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
1.20 NCU PCB (1) Make sure that the MJ cover, low-voltage power supply PCB and gear drive unit are removed. (2) Remove the screw from the NCU bracket. (3) Slightly lift up the NCU bracket (which holds the NCU PCB) and then disconnect the NCU harness from the NCU PCB. IV - 40
IV
- 40
1.20
NCU PCB
(1)
Make sure that the MJ cover, low-voltage power supply PCB and gear drive unit are removed.
(2)
Remove the screw from the NCU bracket.
(3)
Slightly lift up the NCU bracket (which holds the NCU PCB) and then disconnect the NCU
harness from the NCU PCB.