Brother International FAX-8650P Service Manual - Page 79
harnesses to the main PCB., Then hook them to the two latches and route them between
View all Brother International FAX-8650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
(4) Remove the screw and take off the NCU PCB from the NCU bracket. n Reassembling Notes • When setting the NCU PCB to the NCU bracket, fit its edges onto "b" and "c" and into "a" and "d" as illustrated above. • First bind the NCU harness and NCU harness 2 together with the ferrite core NF-80 so that the NF-80 comes near to the binder on the NCU harness 2 as shown above, and connect those harnesses to the main PCB. Then hook them to the two latches and route them between the two bosses as illustrated on the previous page. IV - 41
IV
- 41
(4)
Remove the screw and take off the NCU PCB from the NCU bracket.
n
Reassembling Notes
•
When setting the NCU PCB to the NCU bracket, fit its edges onto "b" and "c" and into "a" and
"d" as illustrated above.
•
First bind the NCU harness and NCU harness 2 together with the ferrite core NF-80 so that the
NF-80 comes near to the binder on the NCU harness 2 as shown above, and connect those
harnesses to the main PCB.
Then hook them to the two latches and route them between the
two bosses as illustrated on the previous page.