Brother International HL 1270N Users Manual - English - Page 59
Unpack the new drum unit., clothes get dirty, wipe or wash it off with cold water immediately. - drum light on
UPC - 012502526001
View all Brother International HL 1270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
CHAPTER 3 MAINTENANCE 2. Place the drum unit assembly on a piece of cloth or disposable paper that is on a flat, horizontal surface. Pull the toner cartridge out of the drum unit assembly while holding down the lock lever with your right hand. Hold down this Lock Lever. Fig. 3-15 Removing the toner cartridge Note Discard the used drum unit according to local regulations. If you are not sure of them, consult your local dealer/retailer. Be sure to seal up the drum unit tightly so that toner powder does not spill out of the unit. It is recommended to put the drum unit on a piece of disposable paper or cloth in case of accidental toner spill or scatter. Handle the toner cartridge carefully as it contains toner. If toner scatters and your hands or clothes get dirty, wipe or wash it off with cold water immediately. 3. Unpack the new drum unit. ! Caution Only unpack a drum unit immediately before you need to install it into the printer. If an unpacked drum unit is subjected to excessive direct sunlight or room light, the unit may be damaged. Handle the drum unit carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water immediately. 3-11