Brother International HL-6050DW Network Users Manual - English - Page 114
Network Initial Setup Problems, How to Print a Network, Configuration How to Print
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
4 Your wireless network is connected successfully. 5 You can now use the Brother Wireless Setup Wizard to configure your print server settings. Network Initial Setup Problems If having configured the necessary wireless network settings and you are unable to print, check the following: 1 Make sure that the printer is powered on, is on-line and ready to print. Verify that the printer and the configuration are good by printing the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information how to print the Network Configuration Page on your print server. If the test fails, check: If you cannot print the Network Configuration Page or the network configuration is incorrect, try to restore the factory default settings of the print server by pressing the Network Test Button on the back of the printer for more than 5 seconds. Then, turn off the printer and then on again. You can check the settings by printing the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information how to print the Network Configuration Page on your print server. TROUBLESHOOTING 10 - 7