Brother International HL-6050DW Network Users Manual - English - Page 79
Configuring the Brother Print Server (Queue Server Mode in NDS Mode) Using PCONSOLE and BRCONFIG
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
9 You will be shown a list of current print servers. Press the INSERT key to create a new entry, type in the NetWare® print server name (BRN_xxxxxx_P1 by default, where xxxxxx is the last six digits of the Ethernet address) and press ENTER. Return to the main Available Options menu by pressing ESCAPE. 10 Select the Print Queue Information (NetWare® 3.xx) or Print Queues (NetWare® 4.1x) menu option to see list of configured print queues. 11 Press INSERT to create a new queue on the file server, type the new queue name and press ENTER. The name does not have to be related to the name of the print server resources, but should be short and convenient for users to remember. 12 Make sure that the new queue name is highlighted, and then press ENTER to configure the queue. 13 Select Queue Servers (in NetWare® 4.1x, this item is called print servers) and press ENTER to specify which network print servers can print jobs from this print queue. The list will be empty, since none have been selected yet if this is a new queue. 14 Press INSERT to get a list of the queue server candidates and select the print server service name from step 9, Press ENTER. 15 Press ESCAPE several times until you return to the Available Options menu. Force the print server to rescan file servers for print jobs. You may either turn the printer off and on again or you may use the BRCONFIG or TELNET command SET NETWARE RESCAN to make the print server rescan for file servers. Configuring the Brother Print Server (Queue Server Mode in NDS Mode) Using PCONSOLE and BRCONFIG 1 Make sure that you are logged in as ADMIN in NDS mode on the NetWare® 4.1x file server. 2 Run the PCONSOLE utility from PC workstation. 6 - 15 NOVELL® NETWARE® PRINTING