Brother International HL-6050DW Network Users Manual - English - Page 70
Configuring NetWare® 3 and NetWare® 4 Systems, Creating the NetWare® Print Server (Bindery Queue
![]() |
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5 Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK. 6 You must now specify the type of connection that you are going to use. There are four possible options. Select the LPR over IP option. 7 Enter the relevant details of the printer and Brother recommends typing Binary_P1 for the printer name. Click finish and wait. Select the printer drivers for the client operating systems. You are now ready to print. Configuring NetWare® 3 and NetWare® 4 Systems Brother's BRAdmin application provides similar functionality to the NetWare® PCONSOLE utility (or the NWADMIN utility in NetWare® 4.1x or later). To use the BRAdmin application to configure a Brother print server under NetWare®, make sure that you are logged in as SUPERVISOR (NetWare® 2.xx or 3.xx) or ADMIN (NetWare® 4.1x or later) and perform the appropriate steps as detailed in the following pages. You must install the Novell® NetWare® Client 32 if you wish to create queue information on your NetWare® servers by BRAdmin. Creating the NetWare® Print Server (Bindery Queue Server) Using BRAdmin Professional Utility 1 Make sure that you logged in as SUPERVISOR (NetWare® 2.xx or 3.xx) or ADMIN (NetWare® 4.xx or later). 2 Start BRAdmin. NOVELL® NETWARE® PRINTING 6 - 6
![](/manual_guide/products/brother-international-hl6050dw-network-users-manual-english-ee0f1a9/70.png)