Brother International HL-6050DW Network Users Manual - English - Page 140
List of factory settings, information, hold down the network test button on the NC-7100w
![]() |
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
List of factory settings Table B-II shows the factory settings. ■ Network factory default setting If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), hold down the network test button on the NC-7100w print server for more than 5 seconds. Table B-II List of factory settings Submenu TCP/IP NETWARE APPLETALK NETBIOS/IP Factory setting Subsetting TCP/IP ENABLE IP ADDRESS SUBNET MASK GATEWAY IP BOOT TRIES IP METHOD APIPA NETWARE ENABLE NET FRAME =ON =ON Factory setting =ON 1 =0.0.0.0 *1 =0.0.0.0 =3 =AUTO =ON =ON =AUTO APPENDIX B - 8
![](/manual_guide/products/brother-international-hl6050dw-network-users-manual-english-ee0f1a9/140.png)
APPENDIX B - 8
List of factory settings
Table B-II shows the factory settings.
■
Network factory default setting
If you wish to reset the print server back to its default factory settings
(resetting all information such as the password and IP address
information), hold down the network test button on the NC-7100w
print server for more than 5 seconds.
Table B-II List of factory settings
Submenu
Factory setting
TCP/IP
Subsetting
Factory setting
TCP/IP ENABLE
=ON
IP ADDRESS
=###.###.###.### *
1
SUBNET MASK
=0.0.0.0 *
1
GATEWAY
=0.0.0.0
IP BOOT TRIES
=3
IP METHOD
=AUTO
APIPA
=ON
NETWARE
NETWARE ENABLE
=ON
NET FRAME
=AUTO
APPLETALK
=ON
NETBIOS/IP
=ON