Brother International HL-6050DW Network Users Manual - English - Page 98
Using BRAdmin and the TCP/IP Protocol to Set the IP Address, TCP/IP filter, Device, Search Active
![]() |
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Using BRAdmin and the TCP/IP Protocol to Set the IP Address If your PC is using the TCP/IP protocol, do the following: 1 Select TCP/IP filter in the left frame of the main window. 2 Select the Device menu and choose the Search Active Devices. If the print server is set to its factory default settings without using a DHCP server, the device will appear as APIPA in the BRAdmin Professional utility screen. 3 Select the Device menu and choose Setup Unconfigured Device. 4 Select the MAC address of your print server and click the Configure button. You can find the node name and MAC address by printing out the Network Configuration Page. See How to Print a Network Configuration Page on page A-8 for information on how to print the Network Configuration Page on your print server. 5 Enter the IP address, Subnet mask and Gateway (if needed) of your print server. 6 Click OK then select Close. 7 With the correctly programmed IP address, you will see the Brother print server in the device list. TCP/IP CONFIGURATION 9 - 4
![](/manual_guide/products/brother-international-hl6050dw-network-users-manual-english-ee0f1a9/98.png)