Brother International HL-6050DW Network Users Manual - English - Page 82
Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
■ Service is the name of the service assigned by NetWare® print server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where xxxxxx is the last six digits of the Ethernet address (MAC address)). ■ You can also enter the TREE and CONTEXT name using your web browser, by connecting to the Brother print server using the TCP/IP protocol and selecting the NetWare protocol configuration. 22 Use the BRCONFIG command or TELNET command: SET NETWARE RESCAN to force the print server to rescan for file servers, or power cycle the printer. The same service assigned by NetWare® print server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare® service, you must define new services that are enabled for NetWare® and for the desired port. Refer to Appendix in this manual for information on how to do this. Configuring the Brother Print Server (Remote Printer Mode) Using PCONSOLE and BRCONFIG 1 Make sure that the PSERVER NLM (NetWare® Loadable Module) is loaded on your file server. 2 Log into the file server from your PC workstation as ADMIN if you are using NetWare® 4.1x (if you want NDS support, do not login under bindery mode). If you are using NetWare® 2.xx or 3.xx, login as SUPERVISOR. 3 Run the PCONSOLE utility from your PC workstation. 4 If you are creating a new print queue, select Print Queue Information (NetWare® 3.xx) or Print Queues (NetWare® 4.1x) from the Available Options menu. NOVELL® NETWARE® PRINTING 6 - 18