Brother International HL-6050DW Network Users Manual - English - Page 51
Windows NT®4.0 / Windows® 2000/XP, LAN Server/OS/2 Warp Server Configuration, Server Configuration:
UPC - 012502612094
View all Brother International HL-6050DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Windows NT®4.0 / Windows® 2000/XP 2 Click on the Ports tab and click the Add Port button. In the Add Port dialog, highlight Brother NetBIOS port. Click New Port and enter the port name. The default port name is BNT1. If you have already used this name, you will get an error message if you try to use it again, in which case use BNT2, etc... Once you have specified the port name, click the OK button. You will then see the Port Properties Dialog. Enter the print server and port name of the printer that you wish to print to and click OK. You should now see the port that you have just created in the Print to the following port setting of the printer driver. LAN Server/OS/2 Warp Server Configuration As Brother print servers support the SMB protocol over TCP/IP via a NetBIOS interface, you can easily configure your printer to work with an IBM LAN Server and OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the fileserver. Use the following procedure to configure the LAN Server, OS/2 Warp Server or OS/2 Warp connect workstation. Server Configuration: 1 Open the Templates folder on the OS/2 desktop. 2 Using the right mouse button, drag the Printer template onto the desktop. 3 Type in any desired name for the printer from the Create a Printer window. 4 Choose an unused port (for example, LPT3) to connect to the printer. 5 Choose the appropriate printer driver from the list. 6 Click Create and then OK. 7 If desired, indicate whether you want to share the printer. 4 - 8 NETBIOS PEER TO PEER PRINTING