Brother International HL-L3270CDW Online Users Guide HTML - Page 216
Error and Maintenance Messages, Action, FAQs & Troubleshooting
View all Brother International HL-L3270CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Home > Troubleshooting > Error and Maintenance Messages Error and Maintenance Messages • HL-L3270CDW If the LCD displays errors and your Android™ device supports the NFC feature, touch your device to the NFC symbol on your Brother machine to access the Brother Solutions Center and browse the latest FAQs from your device. (Your mobile telephone provider's message and data rates may apply.) Make sure the NFC settings of both your Brother machine and your Android™ device are set to On. As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this happens, your machine identifies the error or required routine maintenance and shows the appropriate message. The most common error and maintenance messages are shown in the table. Follow the instructions in the Action column to solve the error and remove the message. You can correct most errors and perform routine maintenance by yourself. If you need more tips: Visit support.brother.com, and click the FAQs & Troubleshooting page. HL-L3210CW/HL-L3230CDN/HL-L3230CDW Error Message 2-sided Disabled Access Denied Belt End Soon Calibrate Cartridge Error Condensation Cooling Down Cover is Open Cause Action The back cover of the machine is Close the back cover of the machine until it not closed completely. locks in the closed position. The function you want to use is restricted by Secure Function Lock 3.0. Ask your administrator to check your Secure Function Lock Settings. The belt unit is near the end of its Order a new belt unit before the LCD displays life. Replace Belt. Calibration failed. • Press and hold down to turn off the machine. Wait a few seconds, and then turn it on again. Perform the color calibration again using the control panel. • Install a new belt unit. • If the problem continues, contact Brother Customer Service or your local Brother dealer. The toner cartridge is not installed correctly. Remove the toner cartridge and drum unit assembly for the color that is indicated on the LCD. Take out the toner cartridge, and put it back into the drum unit again. Re-install the toner cartridge and drum unit assembly back in the machine. If the problem continues, contact Brother Customer Service or your local Brother dealer. Condensation may have formed inside the machine after a room temperature change. Leave the machine turned on. Wait for 30 minutes with the top cover in the open position. Then turn off the machine and close the cover. Turn it on again. The temperature of the inside of the machine is too hot. The machine pauses its current print job and goes into cooling down mode. Wait until the machine has finished cooling down. Make sure all vents on the machine are clear of obstructions. When the machine has cooled down, it will resume printing. The top cover is not completely closed. Open and then firmly close the top cover of the machine. 211