Brother International HL-L3270CDW Online Users Guide HTML - Page 217
Error Message, Cause, Action, Manual, No Drum Unit
View all Brother International HL-L3270CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Error Message Cover is Open Drum ! Cause Action The fuser cover is not completely Close the fuser cover located inside the back closed. cover of the machine. The corona wires on the drum unit Clean the corona wires on the drum unit. must be cleaned. Drum End Soon Drum Stop Jam 2-sided Jam Inside Jam Manual Feed Jam Rear Jam Tray 1 Limit Exceeded Manual Feed Media Mismatch No Belt Unit No Drum Unit See Related Information: Clean the Corona Wires. If the problem continues, replace the drum unit with a new one. The drum unit is near the end of Order a new drum unit before the LCD its life. displays Replace Drum. It is time to replace the drum unit. Replace the drum unit. See Related Information: Replace the Drum Unit. The paper is jammed underneath Remove the paper tray or open the back cover the paper tray or the fuser unit. to gently remove the jammed paper. The paper is jammed inside the machine. Open the top cover, remove the toner cartridges and drum unit assembly, and gently remove the jammed paper. Reinstall the toner cartridges and drum unit assemblies into the machine. Close the top cover. The paper is jammed in the manual feed slot of the machine. Gently remove the jammed paper from in and around the manual feed slot. Reload the paper into the manual feed slot, and then press Go. The paper is jammed in the back Open the fuser cover and gently remove the of the machine. jammed paper. Close the fuser cover. The paper is jammed in the indicated paper tray. Pull out the paper tray and gently remove all jammed paper. The print limit set in Secure Function Lock 3.0 was reached. Ask your administrator to check your Secure Function Lock Settings. Manual was selected as the paper Place paper in the manual feed slot. source in the printer driver, but there is no paper in the manual feed slot. The media type specified in the printer driver differs from the paper type specified in the machine's menu. Load the correct type of paper in the tray, and then select the correct media type in the Paper Type setting on the machine. The belt unit is not installed or not Reinstall the belt unit. installed correctly. The drum unit is not installed correctly. Reinstall the toner cartridges and drum unit assembly. 212