Brother International Innov-is 85e Operation Manual - Page 143
The upper thread
View all Brother International Innov-is 85e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Symptom Probable Cause Remedy Reference The thread is not passed through the bobbin-winding thread guide correctly. Correctly pass the thread through the bobbin-winding thread guide. page 22 Bobbin thread does not wind neatly on Bobbin spins slowly. the bobbin. Move the sewing speed controller to the right (so that the speed will be fast). page 25 The thread that was pulled out was not wound onto the bobbin correctly. Wind the thread that was pulled off round the bobbin five or six times clockwise. page 24 Fabric being sewn with the machine cannot be removed. Thread is tangled below the needle plate. Lift up the fabric and cut the threads below it, and clean the race. page 132 The fabric feeds in the opposite direction. The feed mechanism is damaged. Contact your dealer or the nearest authorized service center. - The upper thread has tightened up. The bobbin thread is incorrectly installed. Correctly install the bobbin thread. page 26, 128 The thread is tangled on the wrong side of the fabric. You have not threaded the upper thread properly. Correct the upper threading. page 28, 4 129 Troubleshooting 141