Brother International Innov-is 85e Operation Manual - Page 144
Error messages
View all Brother International Innov-is 85e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
APPENDIX Error messages If (start/stop button) is pressed before the sewing machine is correctly set up or if an operation is performed incorrectly, an icon indicating the error appears in the LCD. Follow the instructions that appear. The icon will disappear if (OK key) or (Cancel/clear key) is pressed while the icon is displayed. Error Code No. Error Message Probable Cause E1 The motor locked up because the thread is tangled. E2 The start/stop button or reverse/reinforcement stitch button was pressed while the presser foot was raised. The reverse/reinforcement stitch button or needle position button was E3 pressed, or the foot controller was operated while the bobbin winder shaft is moved to the right. E4 The start/stop button was pressed while the foot controller was connected. E5 A stitch other than the buttonhole or bar tack stitch was selected and the start/stop button was pressed while the buttonhole lever is lowered. E6 The buttonhole or bar tack stitch was selected and the start/stop button was pressed while the buttonhole lever is raised. E7 The start/stop button or reverse/reinforcement stitch button was pressed after a stitch has been deleted. E8 The bobbin winder is winding the bobbin. E9 E10 E11 You tried to combine more than 35 character stitches and utility decorative stitches. The start/stop button was pressed without connecting the foot controller while the setting for adjusting the stitch width using the sewing speed controller is set to [ON]. The twin needle setting is selected while a pattern that cannot be sewn with the twin needle is selected. 142