Brother International Innov-is 85e Operation Manual - Page 85
buttonhole lever, and then start sewing.
View all Brother International Innov-is 85e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
■ Changing the stitch width Adjust the stitch width. - + • For details, refer to "Adjusting the stitch width" (page 58). Turn on the sewing machine. b Select stitch 46 or 47 . c Attach buttonhole foot "A". d • For details, refer to "Replacing the presser foot" (page 41). Adjust the stitch width to the thickness of the e gimp thread. Lower the presser foot lever and the f buttonhole lever, and then start sewing. When sewing is finished, gently pull the gimp g thread to remove any slack. 3 Memo z Before sewing buttonholes, check the stitch length and width by sewing a trial buttonhole on a scrap piece of fabric. ■ Sewing buttonholes on stretch fabrics When sewing buttonholes on stretch fabrics, use a gimp thread. Hook the gimp thread onto the part of a buttonhole foot "A" shown in the illustration so that it fits into the grooves, and then loosely tie it. Use a handsewing needle to pull the gimp h thread to the wrong side of the fabric, and then tie it. With a seam ripper, cut the middle part of the i gimp thread remaining at the top end of the buttonhole. Trim off any excess of the gimp thread. Note z If gimp thread is not available use a thread or cord of at least 12 weight. Buttonhole Stitching/Button Sewing 83