Brother International Innov-is 85e Operation Manual - Page 45
Removing the presser foot, holder
View all Brother International Innov-is 85e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removing the presser foot holder Hold the presser foot holder in place with your b right hand, and then tighten the screw using the screwdriver in your left hand. Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder. ■ Removing the presser foot holder Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 41). Use the screwdriver to loosen the presser foot b holder screw. 1 a a Screwdriver Note z If the presser foot holder is not correctly installed, the thread tension will be incorrect. a b c a Screwdriver b Presser foot holder c Presser foot holder screw ■ Attaching the presser foot holder Align the presser foot holder with the lowera left side of the presser bar. a b a Presser bar b Presser foot holder Replacing the Presser Foot 43