Brother International Innov-is 85e Operation Manual - Page 29
Be sure to install the bobbin so that the, thread unwinds in the correct direction, otherwise
View all Brother International Innov-is 85e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CAUTION ● Be sure to install the bobbin so that the thread unwinds in the correct direction, otherwise the thread may break or the thread tension will be incorrect. • Make sure that the thread is correctly passed through the flat spring of the bobbin case. If it is not inserted correctly, reinstall the thread. 1 Memo z The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. While lightly holding down bobbin with your f right hand as shown, guide the thread through the slit (1 and 2). • At this time, check that the bobbin easily rotates counterclockwise. Then, pull the thread toward you to cut it with the cutter (3). 1 a Flat spring Reattach the bobbin cover. g Insert the tab in the lower-left corner of the bobbin cover (A), and then lightly press down on the right side (B). B A X The lower threading is finished. Next, thread the upper thread. Continue with the procedure in "Upper Threading" (page 28). a Slit b Cutter (Cut the thread with the cutter.) X The cutter cuts the thread. Memo z You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure in "Pulling up the bobbin thread" (page 36). Winding/Installing the Bobbin 27