Brother International Innov-is NQ1600E Operation Manual - Page 33
Replacing the Needle
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Replacing the Needle Replacing the Needle Be sure to observe the following precautions concerning the handling of the needle. Failure to observe these precautions is extremely dangerous, for example, if the needle breaks and fragments are dispersed. Be sure to read and carefully follow the instructions below. CAUTION • Only use recommended home machine needles. Use of any other needle may bend the needle or damage the machine. • Never use bent needles. Bent needles can easily break, possibly resulting in injuries. CAUTION • If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle. 1 B GETTING READY Note • Never use thread of 20 weight or lower. It may cause the machine to malfunction. ■ Thread and needle number The lower the thread number is, the heavier the thread; the higher the needle number, the larger the needle. ■ Embroidery needles Use a 75/11 home machine needle. When embroidering on heavier fabrics such as denim, use a 90/14 or 100/16 home machine needle. Checking the needle Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated. Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even. 1 2 1 Flat side 2 Needle type marking 1 1 Flat surface Replacing the needle Use the screwdriver and a needle that has been determined to be straight according to the instructions in "Checking the needle". Press (Needle position button) once or twice to a raise the needle. Place fabric or paper under the presser foot to cover b the hole in the needle plate. Note • Before replacing the needle, cover the hole in the needle plate with fabric or paper to prevent the needle from falling into the machine. Press . c • When the message "OK to automatically lower the presser foot? " appears on the LCD screen, press to continue. The screen changes, and all keys and operation buttons are locked (except ). Basic operations B-23