Brother International Innov-is NQ1600E Operation Manual - Page 71
Adjustments During the Embroidery Process
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Adjustments During the Embroidery Process Adjustments During the Embroidery Process Note • Be careful not to bump the embroidery unit carriage or the presser foot when removing or attaching the embroidery frame. Otherwise, the pattern will not embroider correctly. c Insert a wound bobbin into the machine. the Bobbin" of "Basic operations".) (see "Setting If the bobbin runs out of thread When the bobbin begins to run out of thread during embroidering, the machine will stop and the message below will appear. Press and follow the directions below to rethread the lower threading. If very little sewing remains, you can embroider approximately 10 final stitches without d Press . rethreading the machine by pressing . The machine will stop after sewing approximately 10 stitches. E EMBROIDERY a Press . e Attach the embroidery frame. f To return to the area in the pattern where you stopped sewing, follow steps c through f in the next section. After the thread is automatically cut, the carriage will move. b Unlock the frame-securing embroidery frame. lever and remove the • Be careful not to apply strong force to the fabric at this time. Otherwise, the fabric may loosen in the frame. Embroidering E-23