Brother International Innov-is NQ1600E Operation Manual - Page 36
Attaching the Embroidery Unit
View all Brother International Innov-is NQ1600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Attaching the Embroidery Unit Attaching the Embroidery Unit CAUTION • Do not move the machine with the embroidery unit in place. The embroidery unit may be dropped and cause injury. • Keep your hands and other objects away from the embroidery carriage and frame. Otherwise injury may result. Slide the tab on the cover of the connection port in the b direction of the arrow to open the cover. Note • Do not touch the connector in the embroidery unit connector slot. The connector could be damaged, and it may cause malfunctions. • Do not lift up on the embroidery carriage, and do not forcefully move it. It may cause malfunctions. Note • Be sure to close the cover of the connection port when the embroidery unit is not being used. Insert the embroidery unit connector into the c connection port, and then lightly push in the embroidery unit until it snaps into place. 21 Turn off the machine. a CAUTION • Before attaching the embroidery unit, be sure to turn off the machine. Otherwise, injuries may occur if one of the operation buttons is accidentally pressed and the machine starts sewing. 1 Connection port 2 Embroidery unit connector Note • Make sure that there is no gap between the embroidery unit and the machine, otherwise the embroidery pattern may not be sewn correctly. Be sure to fully insert the connector into the connection port. • Do not push on the carriage when attaching the embroidery unit to the machine, otherwise damage to the embroidery unit may result. Turn on the machine. d A message appears in the screen. Be sure that no objects or hands are near the e embroidery unit and press . B-26 The carriage moves to its initial position.