Brother International Innov-is NQ1600E Operation Manual - Page 45

Confirming the Pattern Position Confirming the Pattern Position The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be repositioned for better placement on the garment, you can check the layout before starting embroidery. Checking the pattern position The embroidery frame moves and shows the pattern position. Watch the frame closely to make sure the pattern will be sewn in the right place. Press a on the embroidery settings screen. Press . c Previewing the selected pattern Press . a B From b , press the key for the position that you want to check.  An image of the pattern as it will be embroidered appears. Press b preview. to select the frame used in the • Frames displayed in light gray cannot be selected. • Press to enlarge the image of the pattern. • The pattern can be sewn as it appears in the following display. STARTING TO EMBROIDER 1 1 Selected position  The carriage will move to the selected position on the pattern. Memo • To see the entire embroidering area, press . The embroidery frame moves and shows the embroidery area. ■ Frame sizes displayed on screen Display Frame type and embroidering area Extra large embroidery frame 26 cm × 16 cm (10-1/4 inches × 6-1/4 inches) Large embroidery frame (sold separately with some models) 18 cm × 13 cm (7 inches × 5 inches) Medium embroidery frame (sold separately with some models) 10 cm × 10 cm (4 inches × 4 inches) Small embroidery frame (sold separately with some models) 2 cm × 6 cm (1 inch × 2-1/2 inches) Press c to return to the original screen. CAUTION • Make sure the needle is up when the embroidery frame is moving. If the needle is down, it could break and result in injury. Basic operations B-35