Brother International MFC 6490CW Quick Setup Guide - English - Page 46

For Network Users BRAdmin Light utility (For Mac OS® X users) BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address from a computer running Mac OS® X 10.2.4 or greater. The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already installed the printer driver, you don't have to install BRAdmin Light again. For more information on BRAdmin Light, visit us at http://solutions.brother.com/. Set your IP address, Subnet Mask d Double-click the unconfigured device. and Gateway using BRAdmin Light Note • If you have a DHCP/BOOTP/RARP server in your network, you don't have to do the following operation. The machine will automatically obtain its own IP address. • Make sure that version 1.4.1_07 or later of Java™ client software is installed on your computer. • The default password for the machine is 'access'. You can use BRAdmin Light to change this password. a Double-click the Macintosh HD icon on your desktop. e Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click OK. f The address information will be saved to the machine. b Choose Library, Printers, Brother and then Utilities. c Double-click the file BRAdmin Light.jar and run the software. BRAdmin Light will then search for new devices automatically. 46