Brother International MFC 7440N Quick Setup Guide - English - Page 8

STEP 1 Setting Up the Machine 3 Install the power cord and phone line 1 Make sure that the machine power switch is off. Connect the AC power cord to the machine. 2 Plug the AC power cord into an AC outlet. Turn the power switch on. Warning • The machine must be grounded using a 3-prong plug. • Since the machine is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power cord connected to your machine when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your machine by disconnecting the telephone line first and then the power cord. Note If you are sharing one phone line with an external telephone, connect it as shown below. 3 Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. Note If you are sharing one phone line with an external telephone answering device, connect it as shown below. Note Make sure the telephone line cord is connected to the jack labeled LINE and not the EXT. jack. Please set the receive mode to External TAD. For more details, see Choosing the correct Receive Mode on page 9 and Connecting an external TAD in Chapter 7 of the User's Guide. 6