Brother International MFC-8710DW Wi-Fi Direct Guide - English - Page 13

Configuration methods Configuring your network using Wi-Fi Direct for MFC-8710DW and MFC-8910DW 2 The Wi-Fi Direct network settings are configured from the control panel of the machine. One push configuration using Wi-Fi Direct 2 2 If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these instructions. a Press Menu. b Press a or b to choose Network. Press OK. c Press a or b to choose Wi-Fi Direct. Press OK. d Press a or b to choose Push Button. Press OK. e When Wi-Fi Direct On? is displayed, press a or b to choose On and then press OK. To cancel, press a or b to choose Off and then press OK. f When Other Network I/F will be disabled. Do you want to continue? is displayed, press 1 to accept. To cancel, press 2. g Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device. is displayed. Press OK on your machine. This will start the Wi-Fi Direct setup. To cancel, press Clear. h Do one of the following:  When your Brother machine is the G/O (Group Owner), your mobile device will try to connect to the machine directly.  When your Brother machine is not the G/O (Group Owner), the machine will display available device names to configure a Wi-Fi Direct network with. Choose the mobile device you want to connect to and press OK. You can re-search for available devices by pressing Rescan. i If your mobile device connects successfully, the machine shows Connected. You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device or scanning to your mobile device, you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/). If the connection failed, see Troubleshooting uu page 21. 10