Brother International MFC-8710DW Wi-Fi Direct Guide - English - Page 26

Troubleshooting Error messages when configuring Wi-Fi Direct from the control panel menu (continued) Error Message Cause Action (For HL-5470DW(T) Another mobile device is already connected After the current connection between your and HL-6180DW(T)) to the Wi-Fi Direct network when the Brother machine and another mobile device Brother machine is the G/O (Group Owner). has shut down, try and configure the Wi-Fi Cannot Connect Direct settings again. You can confirm the A device is already connected. connection status by printing the Network Configuration Report uu Network User's 3 (For MFC-8710DW and Guide: Printing the Network Configuration MFC-8910DW) Report. A device is already connected. Press OK (For MFC-8950DW(T)) A device is already connected. Press OK. I cannot complete the Wi-Fi Direct network setup configuration. Question Are your security settings (SSID/password) correct? Is your Brother machine placed too far from your mobile device? Are there any obstructions (walls or furniture, for example) between your machine and the mobile device? Is there a wireless computer, Bluetooth supported device, microwave oven or digital cordless phone near the Brother machine or the mobile device? Solution  Reconfirm the SSID and password. If you are using your machine as a G/O (Group Owner) in manual configuration, the SSID and password are displayed on the machine's control panel during the configuration procedure. If you are using your mobile device as a G/O (Group Owner) in manual configuration, the SSID and password are displayed on the mobile device's screen during the configuration procedure.  For information on what the SSID name is, see SSID uu page 26. Move your Brother machine within about 3.3 feet (1 meter) from the mobile device when you configure the Wi-Fi Direct network settings. Move your Brother machine to an obstruction-free area. Move other devices away from the Brother machine or the mobile device. 23