Brother International MFC-8710DW Wi-Fi Direct Guide - English - Page 20

Configuration methods One push configuration using WPS (Wi-Fi Protected Setup) 2 If your mobile device supports WPS (PBC; Push Button Configuration), you can configure a Wi-Fi Direct network by following these instructions. a Press Menu. 2 b Press a or b to choose Network. c Press a or b to choose Wi-Fi Direct. d Press a or b to choose Group Owner and then press On. e Press a or b to choose Push Button. f When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off. g When Other Network I/F will be disabled.Do you want to continue? is displayed, press OK to accept. To cancel, press Cancel. h When Activate Wi-Fi Direct on other device.Then Press OK. is displayed, activate your mobile device's WPS one push configuration method (see your mobile device's user's guide for instructions) and then press OK on your machine. This will start the Wi-Fi Direct setup. To cancel, press Stop/Exit. i If your mobile device connects successfully, the machine shows Connected. You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device or scanning to your mobile device, you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/). If the connection failed, see Troubleshooting uu page 21. 17