Brother International MFC-8710DW Wi-Fi Direct Guide - English - Page 19

Configuration methods Configuring your network using Wi-Fi Direct for MFC-8950DW(T) 2 The Wi-Fi Direct network settings are configured from the control panel of the machine. One push configuration using Wi-Fi Direct 2 2 If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these instructions. a Press Menu. b Press a or b to choose Network. c Press a or b to choose Wi-Fi Direct. d Press a or b to choose Push Button. e When Wi-Fi Direct On? is displayed, press On to accept. To cancel, press Off. f When Other Network I/F will be disabled.Do you want to continue? is displayed, press OK to accept. To cancel, press Cancel. g Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when Activate Wi-Fi Direct on other device.Then Press OK. is displayed. Press OK on your machine. This will start the Wi-Fi Direct setup. To cancel, press Stop/Exit. h Do one of the following:  When your Brother machine is the G/O (Group Owner), your mobile device will try to connect to the machine directly.  When your Brother machine is not the G/O (Group Owner), the machine will display available device names to configure a Wi-Fi Direct network with. Choose the mobile device you want to connect to and press OK. You can re-search for available devices by pressing Rescan. i If your mobile device connects successfully, the machine shows Connected. You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device or scanning to your mobile device, you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center (http://solutions.brother.com/). If the connection failed, see Troubleshooting uu page 21. 16