Brother International MFC-9325CW Users Manual - English - Page 163
Fax sending or copy operation in, progress, Black Start, Color Start, Stop/Exit - drum replacement
View all Brother International MFC-9325CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Troubleshooting and routine maintenance Error Message Cause Action No Response/Busy The number you dialed does not Verify the number and try again. answer or is busy. No Toner The toner cartridge or the drum Re-install the toner cartridge or the drum unit unit and toner cartridge assembly that is indicated on the LCD. is not installed properly. No Waste Toner Out of Memory The waste toner box is not installed properly. The machine's memory is full. Re-install the waste toner box. (See C Replacing the waste toner box on page 185.) Fax sending or copy operation in progress Do one of the following: Press Black Start or Color Start to send or copy the scanned pages. Press Stop/Exit and wait until the other operations in progress finish, and then try again. Clear the data from the memory. (See Out of memory message on page 45 or page 92.) Print operation in process Do one of the following: Reduce print resolution. (See Advanced tab in the Software User's Guide on the CD-ROM.) Clear the faxes from the memory. (See Out of memory message on page 92.) Print Unable XX The machine has a mechanical problem. Do one of the following: Disconnect the machine from the power for several minutes, then reconnect it. (The machine can be turned off for approximately 60 hours without losing faxes stored in the memory. See Transferring your faxes or Fax Journal report on page 150.) If the problem continues, call Brother Customer Service. Print Unable 1A One of the issues that can cause this error is that condensation may form inside the machine after a room temperature change. Turn the power switch off and fully open the top cover. Leave the machine off and open for 30 minutes to remove any condensation from inside the machine, then close the top cover and turn it on again. If this does not clear the error, call Brother Customer Service. Protected Device (MFC-9325CW only) The protect switch of the USB Flash memory drive is on. Turn off the protect switch of the USB Flash memory drive. 147