Brother International MFC-9325CW Users Manual - English - Page 197
Resetting the drum counter, Replacing the belt unit, Belt End Soon message, Replace Belt message - reset drum counter
View all Brother International MFC-9325CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Troubleshooting and routine maintenance Resetting the drum counter C When you replace a drum unit with a new one, you need to reset the drum counter by completing the following steps: a Plug the machine's power cord back into the AC power outlet first, and reconnect all cables and telephone line cord. Turn on the machine's power switch. b (For MFC-9325CW) Press Menu, 8, 4. (For MFC-9125CN) Press Menu, 6, 4. c Press a or b to choose the color of the drum you replaced. Press OK. d Press 1 to reset the drum unit counter. e Press Stop/Exit. Replacing the belt unit C Order No. BU-200CL A new belt unit can print approximately 50,000 A4 or Letter size single-sided pages. Belt End Soon message C Belt End Soon If the LCD shows Belt End Soon, it means the belt unit is near the end of its life. Buy a new belt unit and have it ready before you get a Replace Belt message. Replace Belt message C When the following message appears on the LCD, you need to replace the belt unit: Replace Belt IMPORTANT C • DO NOT touch the surface of the belt unit. If you touch it, it could degrade print quality. • Damage caused by incorrect handling of the belt unit may void your warranty. a Turn off the machine's power switch. Unplug the telephone line cord first, and then unplug the power cord from the AC power outlet. b Fully open the top cover by lifting up on the handle (1). 1 IMPORTANT When the scanner is open, you cannot open the top cover. 181