Brother International MFC 9650 Owners Manual - Page 142
Radio Interference (For 220-240 V Model Only), For Your Safety, IEC 825 Laser Class, Disconnect device
View all Brother International MFC 9650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
132 C H A P T E R F I F T E E N Radio Interference (For 220-240 V Model Only) This apparatus complies with EN55022 (CISPR Publication 22)/Class B and EN55024. For Your Safety To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively grounded through the normal household wiring. The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, consult a qualified electrician. IEC 825 Laser Class CLASS 1 LASER PRODUCT. Disconnect device The equipment must be installed near the socket outlet which must be easily accessible. IMPORTANT If the socket outlet is not compatible with the mains plug as fitted, then remove the plug from the mains cord and fit an appropriate three pin plug. If the replacement plug is intended to take a fuse then fit the same fuse as the original. If a moulded plug is severed from the power cord then it should be destroyed because a plug with cut wires is dangerous if plugged into a live socket outlet. Do not leave it where a child might find it. In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362 with the same rating as the original fuse. Always replace the fuse cover. Never use a plug with the cover omitted. WARNING - THIS MACHINE MUST BE PROPERLY EARTHED. The wires in the supplied main cord are the following colours: Green and yellow: Ground Blue: Neutral Brown: Live