Brother International MFC 9650 Owners Manual - Page 45

35 I N I T I A L S E T U P Setting the Beeper Volume You can set the beeper to LOW, HIGH or OFF. The machine comes with this volume set to LOW. When the beeper is set to LOW or HIGH, the machine beeps every time you press a key or make an error, and at the end of sending or receiving a fax. 1 For the FAX-8350P, Press Menu, 1, 4. For the MFC-9650/FAX-8750P, Press Menu, 1, 1, 4. 2 Press or to select your setting. 3 When the screen displays the setting you want, press Set. 4 Press Stop to exit. PABX and TRANSFER Your machine is initially set to be connected with PSTN (Public Switched Telephone Network) lines. However, many offices use a central telephone system or Private Automatic Branch Exchange (PABX). Your fax can be connected to most types of PABX. The recall facility on your fax machine supports timed break recall only (TBR), PBXS normally can work with this for gaining access to an outside line, or for transferring a call to another extension: The feature works when the R key is pressed. Setting PABX If your machine is connected to a PABX system, set PBX:ON. If not, set OFF. 1 For the FAX-8350P, Press Menu, 1, 5. For the MFC-9650/FAX-8750P, Press Menu, 1, 1, 5. The screen displays PBX:OFF SELECT { } & SET 2 Press or to select ON (or OFF). 3 Press Set when the screen displays your selection. 4 Press Stop to exit. You can program an R key press as part of a number stored in a One Touch or Speed Dial location. When programming the One Touch or Speed Dial number (Function menu 6-1 or 6-2) press R first (the screen displays "!"), then enter the telephone number. If you do this, you do not need to press R each time before you dial using a One Touch or Speed Dial location. (See chap. 7.) However, if PBX is set to OFF, you can't use the One Touch or Speed Dial number that the R keypress is programmed into.