Brother International MFC 9650 Owners Manual - Page 90

80 C H A P T E R N I N E Fax Forwarding You cannot use Fax Forwarding when "Fax Storage" is set to OFF. See "Changing the Fax Forwarding number" in this chapter Programming a Fax Forwarding Number When Fax Forwarding is set to ON and the machine has finished receiving a fax in memory, it dials the fax number you've programmed, and forwards the fax message. 1 For the FAX-8350P, Press Menu, 8, 1. For the MFC-9650/FAX-8750P, Press Menu, 1, 8, 1. 2 Press or to select ON (or OFF). FAX FWD:ON SELECT { } & SET 3 Press Set. The screen prompts you to enter the number of the fax machine where faxes will be forwarded. FWD#: ENTER & SET 4 Enter the forwarding number (up to 20 digits). 5 Press Set. 6 Press Stop to exit. You can also dial into your machine from a remote location to switch this feature on, or to change the number you want your faxes forwarding to. Changing the Remote Access Code Enter your Remote Access Code when the fax machine picks up your call, so you can access features remotely. The access code is preset to 1 5 9 , but you can change this. 1 For the FAX-8350P, Press Menu, 8, 3. For the MFC-9650/FAX-8750P, Press Menu, 1, 8, 3. 2 Enter a three-digit number from 000 to 998. The cannot be changed. Do not use the same digits that appear in your Remote Activation or Deactivation Code. 3 Press Set. 4 Press Stop to exit.